[Version]
DriverVer
12/10/2010,1.36.0.0
ClassGuid
{6BDD1FC1-810F-11D0-BEC7-08002BE2092F}
CatalogFile
pln1394bus_x64.cat
DriverPackageType
PlugAndPlay
DriverPackageDisplayName
Pylon 1394 Bus Driver
[Manufacturer]
"Uninstallation"
_UNINSTALL
"Texas Instruments"
_TI, ntamd64
"JMicron"
_JMICRON, ntamd64
"1394 OHCI Compliant Host Controller Vendor"
_GENERIC, ntamd64
[_UNINSTALL]
"Basler Pylon 1394 Bus Uninstallation"
_Install, UNINSTALL\B45CD7EC_740F_42b9_B5DC_47DA6B69DCFC
[_TI.ntamd64]
"Basler Pylon 1394 Bus OHCI TI"
_Install, PCI\VEN_104C&CC_0C0010
[_LSI.ntamd64]
"Basler Pylon 1394 Bus OHCI LSI"
_Install, PCI\VEN_11C1&CC_0C0010
[_NEC.ntamd64]
"Basler Pylon 1394 Bus OHCI NEC"
_Install, PCI\VEN_1033&CC_0C0010
[_VIA.ntamd64]
"Basler Pylon 1394 Bus OHCI VIA"
_Install, PCI\VEN_1106&CC_0C0010
[_RICOH.ntamd64]
"Basler Pylon 1394 Bus OHCI RICOH"
_Install, PCI\VEN_1180&CC_0C0010
[_JMICRON.ntamd64]
"Basler Pylon 1394 Bus OHCI JMicron"
_Install, PCI\VEN_197B&CC_0C0010
[_GENERIC.ntamd64]
"Basler Pylon 1394 Bus OHCI Generic"
_Install, PCI\CC_0C0010
[_Install.ntamd64]
CopyFiles
_CopyFiles_sys, _CopyFiles_dll
AddReg
_PropPage, _PropPageParams, _VirtualDevices
[_Install.ntamd64.Services]
AddService
%S_ServiceName%, 0x00000002, _AddService, _EventLog
[_Install.ntamd64.HW]
[_AddService]
ServiceType
1 ; SERVICE_KERNEL_DRIVER
ErrorControl
1 ; SERVICE_ERROR_NORMAL
ServiceBinary
%12%\%S_DriverName%.sys
[_EventLog]
[_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\%S_DriverName%.sys"
HKR,,TypesSupported, %REG_DWORD%, 7
[_PropPage]
[_PropPageParams]
HKR, "010", SubKey, %REG_SZ%, "1394a"
HKR, "010", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "010", Name, %REG_SZ%, "MinValuePCILatencyTimer"
HKR, "010", DisplayName, %REG_SZ%, "PCI Latency Timer Min Value"
HKR, "010", Description, %REG_SZ%, "Minimum value of the PCI Latency Timer register enforced by the driver."
HKR, "010", Format, %REG_SZ%, "0x%02X"
HKR, "010", Max, %REG_DWORD%, 0xFF
HKR, "011", SubKey, %REG_SZ%, "1394b"
HKR, "011", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "011", Name, %REG_SZ%, "MinValuePCILatencyTimer"
HKR, "011", DisplayName, %REG_SZ%, "PCI Latency Timer Min Value"
HKR, "011", Description, %REG_SZ%, "Minimum value of the PCI Latency Timer register enforced by the driver."
HKR, "011", Format, %REG_SZ%, "0x%02X"
HKR, "011", Max, %REG_DWORD%, 0xFF
HKR, "020", SubKey, %REG_SZ%, "1394a"
HKR, "020", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "020", Name, %REG_SZ%, "AsyRequestRx_DmaBufferSize_KB"
HKR, "020", DisplayName, %REG_SZ%, "Asynch Request RX: DMA buffer size (KB)"
HKR, "020", Description, %REG_SZ%, "Size, in Kilobytes, of the DMA buffer used in the asynch request RX path."
HKR, "020", Min, %REG_DWORD%, 16
HKR, "021", SubKey, %REG_SZ%, "1394b"
HKR, "021", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "021", Name, %REG_SZ%, "AsyRequestRx_DmaBufferSize_KB"
HKR, "021", DisplayName, %REG_SZ%, "Asynch Request RX: DMA buffer size (KB)"
HKR, "021", Description, %REG_SZ%, "Size, in Kilobytes, of the DMA buffer used in the asynch request RX path."
HKR, "021", Min, %REG_DWORD%, 16
HKR, "022", SubKey, %REG_SZ%, "1394a"
HKR, "022", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "022", Name, %REG_SZ%, "AsyResponseRx_DmaBufferSize_KB"
HKR, "022", DisplayName, %REG_SZ%, "Asynch Response RX: DMA buffer size (KB)"
HKR, "022", Description, %REG_SZ%, "Size, in Kilobytes, of the DMA buffer used in the asynch response RX path."
HKR, "022", Min, %REG_DWORD%, 16
HKR, "023", SubKey, %REG_SZ%, "1394b"
HKR, "023", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "023", Name, %REG_SZ%, "AsyResponseRx_DmaBufferSize_KB"
HKR, "023", DisplayName, %REG_SZ%, "Asynch Response RX: DMA buffer size (KB)"
HKR, "023", Description, %REG_SZ%, "Size, in Kilobytes, of the DMA buffer used in the asynch response RX path."
HKR, "023", Min, %REG_DWORD%, 16
HKR, "031", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "031", Name, %REG_SZ%, "AsyRequestTx_MaxRetries"
HKR, "031", DisplayName, %REG_SZ%, "Asynch Request TX: max. retries"
HKR, "031", Description, %REG_SZ%, "Maximum number of retries performed by the hardware in case of ack_busy_X."
HKR, "031", Max, %REG_DWORD%, 15
HKR, "040", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "040", Name, %REG_SZ%, "AsyRequestTx_RetransmitAttemptsBusyX"
HKR, "040", DisplayName, %REG_SZ%, "Asynch Request TX: max. retransmit attempts"
HKR, "040", Description, %REG_SZ%, "Maximum number of request retransmit attempts performed by the driver in case of ack_busy_X."
HKR, "032", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "032", Name, %REG_SZ%, "AsyResponseTx_MaxRetries"
HKR, "032", DisplayName, %REG_SZ%, "Asynch Response TX: max. retries"
HKR, "032", Description, %REG_SZ%, "Maximum number of response retries performed by the hardware in case of ack_busy_X."
HKR, "032", Max, %REG_DWORD%, 15
HKR, "033", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "033", Name, %REG_SZ%, "AsyResponseTx_MaxQueueDepth"
HKR, "033", DisplayName, %REG_SZ%, "Asynch Response TX: max. queue depth"
HKR, "033", Description, %REG_SZ%, "Maximum depth of the response packet TX DMA program."
HKR, "033", Max, %REG_DWORD%, 8192
HKR, "041", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "041", Name, %REG_SZ%, "AsyRequestTx_MaxOutstandingRespPerNode"
HKR, "041", DisplayName, %REG_SZ%, "Asynch Request TX: max. outstanding"
HKR, "041", Description, %REG_SZ%, "Maximum number of outstanding asynch responses at one time, counted per node."
HKR, "041", Max, %REG_DWORD%, 8
HKR, "034", Type, %REG_DWORD%, %PARAM_DWORD%
HKR, "034", Name, %REG_SZ%, "EnumerationHoldOff_ms"
HKR, "034", DisplayName, %REG_SZ%, "Enumeration hold-off time (ms)"
HKR, "034", Description, %REG_SZ%, "Time interval, in milliseconds, between bus reset and start of node enumeration."
HKR, "036", Type, %REG_DWORD%, %PARAM_ENUM%
HKR, "036", Name, %REG_SZ%, "BmUpdateGapCount"
HKR, "036", DisplayName, %REG_SZ%, "Update Gap Count"
HKR, "036", Description, %REG_SZ%, "Update the Gap Count of the IEEE1394 network based on the number of nodes."
HKR, "036", 0, %REG_SZ%, "no"
HKR, "036", 1, %REG_SZ%, "yes"
HKR, "037", Type, %REG_DWORD%, %PARAM_ENUM%
HKR, "037", Name, %REG_SZ%, "BmForceRootCycleMaster"
HKR, "037", DisplayName, %REG_SZ%, "Force Root is Cycle Master"
HKR, "037", Description, %REG_SZ%, "Force a root node that is capable of acting as the Cycle Master."
HKR, "037", 0, %REG_SZ%, "no"
HKR, "037", 1, %REG_SZ%, "yes"
HKR, "039", Type, %REG_DWORD%, %PARAM_ENUM%
HKR, "039", Name, %REG_SZ%, "BmAdviseLinkOn"
HKR, "039", DisplayName, %REG_SZ%, "Send LinkOn packets"
HKR, "039", Description, %REG_SZ%, "Send a LinkOn PHY packet to all nodes with an active LLC after bus reset."
HKR, "039", 0, %REG_SZ%, "no"
HKR, "039", 1, %REG_SZ%, "yes"
HKR, "042", Type, %REG_DWORD%, %PARAM_ENUM%
HKR, "042", Name, %REG_SZ%, "BmForceNotifyOnRootNode"
HKR, "042", DisplayName, %REG_SZ%, "Force root node notification"
HKR, "042", Description, %REG_SZ%, "Force a PHY Config packet with the current root node after enumeration."
HKR, "042", 0, %REG_SZ%, "no"
HKR, "042", 1, %REG_SZ%, "yes"
HKR, "038", Type, %REG_DWORD%, %PARAM_ENUM%
HKR, "038", Name, %REG_SZ%, "ForceMaxPhySpeed"
HKR, "038", DisplayName, %REG_SZ%, "Force maximum PHY speed"
HKR, "038", Description, %REG_SZ%, "Force a maximum PHY speed if it is not specified in the SelfID packets (skip PHY port enumeration)."
HKR, "038", 0, %REG_SZ%, "off"
HKR, "038", 1, %REG_SZ%, "S100"
HKR, "038", 2, %REG_SZ%, "S200"
HKR, "038", 3, %REG_SZ%, "S400"
HKR, "038", 4, %REG_SZ%, "S800"
HKR, "043", Type, %REG_DWORD%, %PARAM_ENUM%
HKR, "043", Name, %REG_SZ%, "IsoAllocBwAddProtocolTimes"
HKR, "043", DisplayName, %REG_SZ%, "Add isochronous protocol times"
HKR, "043", Description, %REG_SZ%, "Take account of isochronous protocol times when allocating bandwidth."
HKR, "043", 0, %REG_SZ%, "no"
HKR, "043", 1, %REG_SZ%, "yes"
HKR, "035", Type, %REG_DWORD%, %PARAM_ENUM%
HKR, "035", Name, %REG_SZ%, "ExposeCompatibleIDs"
HKR, "035", DisplayName, %REG_SZ%, "Expose Compatible IDs"
HKR, "035", Description, %REG_SZ%, "Expose a set of compatible hardware IDs. This causes Windows in-box device class drivers to be loaded."
HKR, "035", 0, %REG_SZ%, "no"
HKR, "035", 1, %REG_SZ%, "yes"
HKR, "044", Type, %REG_DWORD%, %PARAM_ENUM%
HKR, "044", Name, %REG_SZ%, "AddStaticConfigRomUnits"
HKR, "044", DisplayName, %REG_SZ%, "Add Static ConfigRom Units"
HKR, "044", Description, %REG_SZ%, "Add static units to ConfigRom (read from registry) on driver load."
HKR, "044", 0, %REG_SZ%, "no"
HKR, "044", 1, %REG_SZ%, "yes"
HKR, "100", Type, %REG_DWORD%, %PARAM_STRING%
HKR, "100", Name, %REG_SZ%, "OHCI_MaxSpeed"
HKR, "100", DisplayName, %REG_SZ%, "OHCI Max Speed"
HKR, "100", Description, %REG_SZ%, "Maximum transfer speed supported by this OHCI chip."
HKR, "100", Flags, %REG_DWORD%, %PARAM_READ_ONLY%
HKR, "101", Type, %REG_DWORD%, %PARAM_STRING%
HKR, "101", Name, %REG_SZ%, "OHCI_Version"
HKR, "101", DisplayName, %REG_SZ%, "OHCI Version"
HKR, "101", Description, %REG_SZ%, "Version of this OHCI chip."
HKR, "101", Flags, %REG_DWORD%, %PARAM_READ_ONLY%
[_DefaultParams]
[_AddReg_Service]
HKR, "%CVTAB%\0000A02D\00003053", "options", %REG_DWORD%, 0x00000001
HKR, "%CVTAB%\0000A02D\00003053", "tag", %REG_BINARY%, 8B,BF,D1,E8, 2A,5D,AF,25
HKR, "%CVTAB%\FFFFFFFF\FFFFFFFF", "options", %REG_DWORD%, 0x00000000
HKR, "%CVTAB%\FFFFFFFF\FFFFFFFF", "tag", %REG_BINARY%, BE,90,89,06, 6A,3C,F9,1F
[_VirtualDevices]
[_CopyFiles_sys]
pln1394bus_x64.sys,,,0x00000004
[_CopyFiles_dll]
[DestinationDirs]
DefaultDestDir
12 ; %windir%\system32\drivers
_CopyFiles_dll
11 ; %windir%\system32
[SourceDisksNames.amd64]
[SourceDisksFiles.amd64]
[Strings]
CVTAB
"{3F995B21-29F3-46c3-A257-F86F79E469C5}"
PARAM_SHOW_ALWAYS
0x00000001
PARAM_READ_ONLY
0x00000002
S_Provider
"Basler Vision Technologies"
S_DiskName
"Basler Pylon 1394 Bus Driver Disk"
S_ServiceName
"pln1394bus"
S_DriverName
"pln1394bus_x64"